Factory direct sales pair roll extrusion granulator/compound
fertilizer granulator/compound fertilizer equipment
1. introduction
The double-roll extrusion granulator is suitable for ammonium
bicarbonate, ammonium chloride, ammonium sulfate, ammonium nitrate,
monoammonium phosphate, etc. The granulating effect is particularly
good, and the ball formation rate can reach 86%. It adopts a
non-drying process, and granulates at room temperature. Forming,
low investment, quick results and good economic benefits. Low
power, reliable operation, no three wastes, stable operation,
convenient maintenance, reasonable flow layout, advanced technology
and low production cost. Tinci roller granulator has a wide
adaptability of raw materials. It can be used to granulate various
raw materials such as compound fertilizer, medicine, chemical
industry, feed, coal, metallurgy, etc., and can produce various
concentrations and types (including organic fertilizer, inorganic
fertilizer, Fertilizer, biological fertilizer, magnetic fertilizer,
etc.) compound fertilizer. In particular, the granulation of rare
earth, ammonium bicarbonate, and ammonium sulfate compound
fertilizers has filled the domestic gap and is at the leading level
in the country. It is a promotion project of national environmental
protection applicable technologies.
The working principle of the roller squeeze granulator: The belt
and pulley are driven by the motor, and transmitted to the driving
shaft through the reducer, and synchronized with the driven shaft
through the split gear, and work in opposite directions. The
material is added from the hopper, formed by the pair of rollers,
demoulded and pelletized, and passed through a pair of chains,
transferred to the crushing sieve studio, under the sieve and
separated the finished particles (balls), and then the returned
material is mixed with the new material. Then granulate. With the
continuous rotation of the motor and the continuous entry of
materials, mass production can be realized.
2. specifications
| type | power | capacity | feeding moisture |
| Z-1 | 11KW | 1T/H | 2%-5% |
| Z-1.5 | 15KW | 1.5T/H | 2%-5% |
| Z-2 | 18.5KW | 2T/H | 2%-5% |
| Z-3 | 22KW | 3T/H | 2%-5% |
